Skip to content
Damp & mould sensorsTry it free
NLEN
Energy and heating

Save energy in rented housing, without a smart thermostat.

The sensors in the rooms recognise from their own readings when the heating comes on. You see per house how long it runs, what it costs and where plug-in heaters use electricity.

Request a pilot Try the demo

No cameras or microphonesServers in the EUYour data is yours

Where it goes wrong

What you don't see costs money.

Heating an empty houseThe residents work during the day, the thermostat stays high all day.
Plug-in heatersA 2 kW heater running 6 hours a day costs well over € 100 a month in electricity.
No view per houseThe energy bill comes once a year; which house makes the difference, you cannot see.
One platform

Part of one system.

Sensors, housing management, fault reporting, the route planner and the commute planner share the same houses, rooms and residents. What a sensor measures shows up at the address; a fault report arrives at the right house; the route goes where attention is needed.

The platform

What's included

The sensors in the rooms recognise the heating from their own readings – no smart thermostat, no extra meter. Per house you see when it comes on, how long it runs and what it costs, with tips to set the thermostat better. More about energy →

When the heating runsper day and per house, at night too.
Thermostat tipsfor example a later start when the residents work during the day.
Possible saving per monthan estimate per house, with your own gas price or the CBS average.
Gas and electricity meter readingswith that month's energy price, back in time too.
Plug-in heatersa room getting clearly warmer than the rest while it is cold outside.
No smart thermostat neededThe living room and the whole house warm up together: that is the heating. Nothing more is needed.
Heat keeping per houseHow fast a house cools down when the heating is off – a sign of draughts or poor insulation.
Changed?You see it when a house suddenly heats differently than in the weeks before.
Monthly reportPer house: hours of heating, gas, electricity and cost, next to the previous month.
Real pricesThe CBS energy price per month, or your own contract price.
An estimate, honestlyAmounts are an estimate; with meter readings it uses the real consumption.
Read alsoSaving energy in rented rooms →What does a plug-in heater cost? →Passing on energy costs →
How it works

Up and running in three steps.

  1. 1A sensor per room, a gateway per houseThe gateway plugs into a socket; nothing changes on the thermostat or boiler.
  2. 2After a few weeks, the patternWhen the heating comes on, how long it runs, and at night.
  3. 3Tips and an estimateA better thermostat setting, with the possible saving as an estimate.
Questions

Frequently asked questions

Do I need a smart thermostat?

No. eyesonrooms recognises the heating from the readings of the sensors in the rooms. Nothing changes on the thermostat or the boiler.

How much will I save?

That depends on the house and the residents. eyesonrooms shows an estimate per house with your own gas price or the CBS average – not a promise.

Can I enter meter readings?

Yes, gas and electricity, also back in time; eyesonrooms uses the energy price of that month.

Who it is for

Made for those who rent out and manage rooms.

Migrant worker housingEnergy, mould and SNFMore Student housingRooms, mould and fault reportingMore Staffing agenciesHousing, beds and commuteMore Housing and facility managersInspections, meters and faultsMore

Start small: a pilot in a few houses.

After a month you know per room where energy leaks away and where mould threatens.

Request a pilot Try it freeTry the demo